Table of Contents
Advertisement
No.
Description
1
Push the front of the server along the edges.
2
Push the rear of the server along the edges and on either side of the rear LED panel.
5. Avoid damaging the server when moving it.
Caution – Never tip or rock the server. Tipping or rocking the server, or pushing on
the side panels can tip the server over.
Caution – Never push the server by pressing in the center of a door. The door might
bend under the pressure. If necessary, remove the doors before moving the server.
See
"Remove the Door" on page 100
Caution – Be careful when moving the server near floor cutouts. If the server's
castors fall into a floor cutout, the floor and the server could be severely damaged.
for instructions.
Installing the Server
81
Advertisement
Table of Contents
