SP Network Addresses
During the initial Oracle ILOM configuration, you must provide network addresses
for the following SP components:
SP0 NET MGT port
■
SP1 NET MGT port
■
Active-SP
■
PDomain0-SPP
■
PDomain1-SPP (if your configuration includes 2 or more PDomains)
■
PDomain2-SPP (if your configuration includes 3 or more PDomains)
■
PDomain3-SPP (if your configuration includes 4 PDomains)
■
Note – The Oracle ILOM SPs do not support DHCP. You must assign static network
addresses to these components.
For the preceding SP components, provide the following network address
information:
Host name (optional)
■
IP address
■
Network domain
■
Netmask
■
IP address of the network gateway
■
IP address of the network name server
■
Note – The SPs, Active-SP, and all PDomain#-SPPs should share the same IP
network, with unique IP addresses assigned to each.
Related Information
"Mandatory Cable Connections and Network Addresses" on page 59
■
"SP Cables" on page 60
■
"Dual-Redundant SPs" on page 143
■
"Log In to the Active SP" on page 148
■
"Set Oracle ILOM Network Addresses" on page 150
■
64
SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014