Table of Contents
Advertisement
1.
Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET 0) on the rear of the chassis.
2.
Connect Category 5 (or better) cables from your network switch or hub to the
remaining Ethernet ports (NET 1, NET 2, and NET 3), as needed.
Related Information
"Configuring SP and Host Network Addresses" in SPARC and Netra SPARC S7-2 Series
■
Servers Administration Guide
"Powering On the Server for the First Time" on page 75
■
Connect Other Data Cables
If your server configuration includes optional PCIe cards, connect the
appropriate I/O cables to their connectors.
Refer to the PCIe card documentation for specific instructions.
Connect Other Data Cables
Connecting Cables
71
Advertisement
Table of Contents
