Cable The Ethernet Ports; Connect Other Data Cables - Oracle Netra X5-2 Installation Manual

Cable the Ethernet Ports

Once the server is running the OS, these connections provide Ethernet access to the server. See
"10 Gigabit Ethernet Ports" on page
The Oracle ILOM sideband management feature enables you to access the SP using
Note -
one of these Ethernet ports. Refer to the Oracle ILOM Administor's Guide for Configuration
and Maintenance For Release 3.2.x at
instructions.
Connect a Category 6 (or better) cable from your network switch or hub to
1.
Ethernet port 0 (NET 0) on the rear of the chassis.
(Optional) Connect Category 6 (or better) cables from your network switch or
2.
hub to the remaining Ethernet ports.
Related Information
"Available Connections" on page 61
■
"Cable the SP" on page 64
■
"Connect Other Data Cables" on page 65
■
"Identifying Ports" on page 66
■
"Rear Panel Components (Installation)" on page 14
■

Connect Other Data Cables

If your installation includes optional PCIe cards, USB devices, or alarms, make
the appropriate connections to those devices.
Gather the cables and equipment to make these connections, based on your server options:
PCIe cards — refer to PCIe device documentation
■
USB devices — see
■
Video — see "Video Port" on page 70
■
Related Information
"Available Connections" on page 61
■
"Cable the SP" on page 64
■
"Cable the Ethernet Ports" on page 65
■
"Identifying Ports" on page 66
■
"Rear Panel Components (Installation)" on page 14
■
68.
http://www.oracle.com/goto/ilom321/docs
"USB Ports" on page 69
Cable the Ethernet Ports
for
Connecting Cables 65