Table of Contents
Advertisement
▼ Install the Door
After securing the SP cables, re-install the front door. You can follow these same steps
to install either door.
1. Confirm that the upper hinge bracket is loosely attached to the server.
This bracket should have been loosened when you removed the door. If the hinge
bracket is secured tightly to the server, use a T20 screwdriver to loosen the two M4
screws.
1
Upper hinge pin
2
M4 screws securing the upper hinge bracket
Connecting the Front SP Cables
115
Advertisement
Table of Contents
Need help?
Do you have a question about the sparc M5-32 and is the answer not in the manual?
Questions and answers