Table of Contents
Advertisement
3. Remove the server doors.
For instructions on removing a door, see
4. Position the ramp so that the server can successfully go up or down the
elevation.
5. Use six or more people either to push the server up the ramp or to slow the
server rolling down the ramp.
Push or slow the server along the edges of the server. With the rear door removed,
one of the six people can move the server by pushing on either side of the rear
LED panel.
Caution – Ensure that the server remains on the ramp. If a castor falls off a side of
the ramp, the server can tip over and damage the equipment and cause serious
physical injury.
"Remove the Door" on page
Installing the Server
100.
85
Advertisement
Table of Contents
