FIGURE 11-29
5. Set the NVRAM aside on an antistatic mat.
6. Choose your next step:
If you removed the NVRAM prior to removing the motherboard, return to
■
of
The workstation does not function without the NVRAM. To install a new
■
NVRAM, proceed to
11.4.3
Installing the NVRAM
The NVRAM installs directly onto the motherboard. There are no additional
fasteners or cables.
1. Open and position the chassis.
Refer to:
"Removing the Access Panel" on page 10-12
■
"Positioning the Chassis" on page 10-16
■
2. Locate the NVRAM connector.
See
FIGURE 11-28
3. Align the NVRAM key to the NVRAM connector key on the motherboard.
See
FIGURE 11-30
Removing the NVRAM
"Removing the Motherboard" on page
"Installing the NVRAM" on page
.
.
Chapter 11 Replacing the Motherboard and Associated Components
11-46.
11-27.
Step 8
11-27