Installing The Ultra 30/60 System - Sun Microsystems Ultra 30 Installation Manual

Installing the Ultra 30/60 System

1. If your rack has stabilizing bars, extend these prior to installing the system.
Refer to the documentation that accompanied your rack for directions on using
stabilizing bars.
Caution – If you are installing multiple systems, install the lower units first, then
work toward the top. This prevents the rack from being top-heavy and tipping.
Leave six rackmount units of space between each rackmounting tray.
2. Facing the front of the system and the front of the rack, place the system on the
mounting tray.
3. Slide the system back until it is slightly behind the front of the rackmounting tray
(
FIGURE 11
FIGURE 11
14 Sun Ultra 30/60/80 Systems Rackmount Installation Guide • July 1999
).
Placing the Ultra 30/60 System in the Rack