Internal Component Upgrades; Table 16-2 Sun Blade 1500 Internal Component Upgrades - Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual

Conditions for Installing Optional PCI Cards (Continued)
TABLE 16-1
Card Type Product
Cryptographic Sun Crypto Accelerator
1000
Note – The SunPCi III Pro coprocessor card can be installed in any slot. However,
when the card is installed in the 33 MHz slots (PCI0 - PCI3), SunPCi III video and
disk drive operations have degraded performance.
Note – If a Fibre Channel interface card is not installed, the following message might
appear in the /var/adm/messages file:
WARNING: fcsm: _init: Transport Layer driver 'fp' load failed
There is no action necessary and you may ignore this message.
Instructions for replacing, removing, or installing PCI cards are provided in
"Replacing the PCI Cards" on page
16.2

Internal Component Upgrades

You can customize the Sun Blade 1500 workstation with additional memory and
drives.
installation instructions.
Sun Blade 1500 Internal Component Upgrades
TABLE 16-2
Component Conditions for Installation
2 GB DIMM Install in pairs (DIMM0 and DIMM1, DIMM2 and
DIMM3).
1 GB DIMM Install in pairs (DIMM0 and DIMM1, DIMM2 and
DIMM3).
16-4 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
Conditions for Installation
Install the following packages from the supplemental
software CD-ROM:
• SUNWcrypm
• SUNWcrypr
• SUNWcrypu
• SUNWcrysl
• SUNWcrysu
• SUNWdcamn
• SUNWdcar
• SUNWdcav
lists upgrades, conditions for installation, and where to find the
TABLE 16-2
11-28.
Procedure
"Installing DIMMs" on page 11-7
"Installing DIMMs" on page 11-7