Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 405

Conditions for Installing Optional PCI Cards (Continued)
TABLE 16-1
Card Type Product
Fibre channel host Single-Loop PCI FC-AL
adapters Host Adapter
Dual-Loop PCI FC-AL
Host Adapter
2GB PCI Single Fiber
Channel Network Host
Bus Adapter
2GB PCI Dual Fiber
Channel Network Host
Bus Adapter
Communication SunHSI/P™ High Speed
interfaces Serial Interface - 4 port
2.0
SunSAI/P Serial
Asynchronous Interface -
8 port 3.0
Ethernet interfaces GigaSwift Ethernet
Gigabit Ethernet 3.0
SunFastEthernet™
Sun Quad
FastEthernet™
Sun PCi co- SunPCi III Pro
processor
Conditions for Installation
There are no special conditions for basic installation.
Install the following packages:
• SUNWsan
• SUNWcfpl
• SUNWcfplx
Install the following qpatches:
• Q958611
• Q958612
The SunHSI/P card does not fit into the 66 MHz slot, PCI4.
Install the following packages from the supplemental
software CD-ROM:
• SUNWhsip
• SUNWhsipm
• SUNWhsipu
Installing more than one card requires additional
considerations and running the saipconfig configuration
script. Refer to the SunSAI/P User's Guide, 806-4206, for more
information.
Install the following packages:
• SUNWsaip
• SUNWsaipu
There are no special conditions for basic installation.
PCI card to Sun Blade 1500 chassis tolerances are tight.
Connecting some network cables might require additional
effort.
Install only in slot PCI4.
Optional installation of the USB/Firewire® backplate
and/or serial/parallel port backplate occupies adjacent PCI
slots.
Install the following packages:
• SUNWspci3
• SUNWspvn3
For Microsoft Windows functionality, a licensed version of
Windows must be installed.
Chapter 16 Customizing Your System 16-3