Removing The Dimm Cooling Duct; Figure 13-20 Dimm Cooling Duct Location And Identification - Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual

FIGURE 13-20
13.4.2

Removing the DIMM Cooling Duct

1. Power off the system and open the chassis.
Refer to:
"Powering Off the Workstation" on page 10-4
■
"Removing the Access Panel" on page 10-12
■
2. Locate the DIMM cooling duct.
The DIMM cooling duct is secured to the rear fan bracket by guide rails formed in
the rear fan bracket. See
DIMM Cooling Duct Location and Identification.
FIGURE 13-20
Guide
rails (2)
Pivot pins
and .
FIGURE 13-21
Chapter 13 Replacing Chassis Components 13-23