Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 402

3. Monitor the boot messages.
If any warning messages are found, refer to
information on interpreting messages and possible corrective action.
4. If you are uncertain that the problem has been resolved, refer to
Flowcharts" on page
Use the post command to perform the Power-On Self-Test (POST).
■
Refer to
interpreting the response. This might require rebooting the workstation.
Run selected OpenBoot Diagnostics tests.
■
Refer to
implementation of tests.
Run the SunVTS (Validation Test Suite) software.
■
Refer to
and interpreting the results.
15-12 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
4-1, or consider these alternatives:
"Power-On Self-Test" on page 7-1
"OpenBoot PROM" on page 8-1
"SunVTS" on page 9-1
"Displayed Messages" on page 3-5
for information on POST output and
for information on availability and
for information on running the SunVTS software
for
"Troubleshooting