Smart Card Reader Problem - Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual

4.3.4

Smart Card Reader Problem

There is a problem with
the smart card reader.
Is the
operating system
running?
Y
N
Type:
ls /dev/scmi2c0
Is the scmi2c0
file listed?
Y
Check the smart card
reader with SunVTS. See
"SunVTS" on page 9-1.
Did
the smart card reader
pass the tests?
Y
Problem with smart card
reader application. Con-
tact system administra-
tor.
FIGURE 4-28
4-32 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
N
N
N
Check the smart card
reader and replace if nec-
essary. See "Replacing
the Smart Card Reader"
on page 12-15.
Smart Card Reader Problem
In normal operation, the smart card reader accepts Payflex
and Cyberflex smart cards for authentication. The LED in
the smart card reader provides status of the smart card.
Flashing amber means there are errors reading from or
writing to the card. See "Smart Card Reader" on
page C-32.
Checking a component means checking the electrical con-
nections and fit.
Is the ok prompt
displayed?
Y
Check the smart card
reader with OpenBoot
Diagnostics. See "Open-
Boot Diagnostics" on
page 8-5.
Did
the smart card reader
pass the test?
Y
Boot the operating sys-
tem. Type:
ok boot -r
Go to
N
N
Press the Stop-A keys.
N
Check the smart card
reader and replace if nec-
essary. See "Replacing
the Smart Card Reader"
on page 12-15.