Installing The Front Fan; Figure 13-10 Removing The Front Fan Bracket - Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual

Connector FAN0 SYS
FIGURE 13-10
5. Squeeze the front fan bracket latch, then slide the front fan bracket toward the
chassis opening.
See
FIGURE 13-10
6. Lift the front fan bracket out of the system chassis and set it aside.
Proceed to
Caution – Do not operate the workstation without the front fan.
13.2.3

Installing the Front Fan

1. Open the chassis.
Refer to
2. Locate where the front fan is to be installed.
See
FIGURE 13-8
3. Remove the front fan assembly from its packaging.
The front fan is shipped in its green bracket.
Removing the Front Fan Bracket
.
"Installing the Front Fan" on page
"Removing the Access Panel" on page 10-12
.
13-11.
Chapter 13 Replacing Chassis Components 13-11