Sun Microsystems Blade 1500 Service, Diagnostics, And Troubleshooting Manual page 28

Connecting the Interface Cable to the Hard Drive(s) 14-12
FIGURE 14-10
IDE Power Cable Connections 14-14
FIGURE 14-11
Disconnecting the IDE Power Cable From the Hard Drive(s) 14-15
FIGURE 14-12
Disconnecting the IDE Power Cable From the Optical Drive 14-15
FIGURE 14-13
Connecting the IDE Power Cable to the Optical Drive 14-16
FIGURE 14-14
Connecting the IDE Power Cable to the Hard Drive(s) 14-17
FIGURE 14-15
Power Switch Assembly Location and Identification 14-18
FIGURE 14-16
Removing the Power Switch Assembly Cable From the Bezel Cable Clip and Metal
FIGURE 14-17
Clamp 14-19
Removing the Power Switch Assembly 14-20
FIGURE 14-18
Routing the Power Switch Assembly Cable 14-21
FIGURE 14-19
Securing the Power Switch Assembly Cable to the Bezel Cable Clip and Metal Clamp 14-22
FIGURE 14-20
Audio USB Board Cable Connections 14-24
FIGURE 14-21
Removing Audio and USB Cables From the Motherboard 14-25
FIGURE 14-22
Removing the Audio USB Cables From the I/O Cable Clip 14-26
FIGURE 14-23
Disconnecting Cables From the Audio USB Board 14-27
FIGURE 14-24
Connecting Cables to the Audio USB Board 14-28
FIGURE 14-25
Connecting the Audio and USB Cables to the Motherboard 14-29
FIGURE 14-26
Securing the Audio USB Cables to the I/O Cable Clip 14-30
FIGURE 14-27
Positioning the Chassis Upright 15-2
FIGURE 15-1
Locating Bezel Short Tabs 15-3
FIGURE 15-2
Aligning the Bezel 15-4
FIGURE 15-3
Securing the Bezel 15-4
FIGURE 15-4
Aligning the Access Panel 15-6
FIGURE 15-5
Closing the Access Panel 15-7
FIGURE 15-6
Tightening the Access Panel Thumbscrews 15-7
FIGURE 15-7
Reconnecting the Keyboard, Mouse, Monitor, and Network Connections 15-9
FIGURE 15-8
Reconnecting the Power Cord 15-10
FIGURE 15-9
Powering Up the Workstation 15-11
FIGURE 15-10
IEEE 1394A Port B-2
FIGURE B-1
xxviii Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004