Replacing The Tod/Nvram; Figure 10-4 Connecting/Disconnecting The Speaker Cable; Figure 10-5 Removing/Positioning The Cpu Board - Sun Microsystems SPARCstation Voyager Service Manual

FIGURE 10-4
8. Remove the CPU board from the system.
Pins
(four places)
FIGURE 10-5
9. Place the CPU board on an antistatic surface.

Replacing the TOD/NVRAM

Remove the TOD from your defective CPU board, and install it on the replacement
CPU board.
98 SPARCstation Voyager Service Manual • December 1994
CPU board
Connecting/Disconnecting the Speaker Cable
Removing/Positioning the CPU Board
CPU board
Card edge
Slots
(four places)
Speaker cable