Electrical Specifications; Environmental Requirements - Oracle Sun Server X4-4 Service Manual

Server Specifications

Electrical Specifications

The following table lists the electrical specifications for the Sun Server X4-4.
Note -
technetwork/server-storage/sun-x86/overview/index.html
Parameter
Nominal input
frequencies
Operating
input voltage
range
Rated input
current
Maximum
power
consumption
Maximum heat
output

Environmental Requirements

The following table lists the environmental requirements for the Sun Server X4-4.
Parameter
Operating temperature (single,
non-rack system)
Non-operating temperature
(single, non-rack system)
Operating humidity (single, non-
rack system)
Non-operating humidity (single,
non-rack system)
Operating altitude (single, non-
rack system)
Non-operating altitude (single,
non-rack system)
282 Sun Server X4-4 Service Manual • October 2015
For up-to-date information on power consumption, refer to:
Value
50/60 Hz
100-127 VAC (Two-CPU configuration)
200-240 VAC (Two or Four-CPU configuration)
100-127 VAC 12A (Two-CPU configuration)
200-240 VAC 10A
2000W
6824 BTU/hr
Value
At sea level: 5
At altitude: 5
-40
10% to 90% relative humidity, non-condensing
Up to 93% relative humidity, non-condensing
Up to 3,000 m (9,840 ft), maximum ambient temperature is derated by 1
degree C per 300m above 900 m, except in China where regulations may limit
installations to a maximum altitude of 2,000 m
0 m to 12,000 m (0 ft to 40,000 ft)
° ° °
C to 35 C (41 F to 95
° ° °
C to 31 C (41 F to 88
° ° ° °
C to 68 C (-40 F to 154 F)
http://www.oracle.com/
°
F)
°
F)