Oracle Sun Server X4-4 Service Manual page 93

b. (Optional) To move the CMA for access to the back of the server, see
"Release the CMA" on page
c. At the front of the server, release the slide rails by pushing the two green
latches inward.
d. Slowly pull the server forward until both slide rails lock at the fully extended
maintenance position.
The locking action is accompanied by an audible click. The server is now in the
maintenance position and ready for service.
4. (Optional) To remove the server entirely from the rack, see
the Server from the Rack" on page
Set up an ESD-safe service location.
5.
Set up a space where you can set components. The space needs to be ESD safe. See
"Performing Electrostatic Discharge and Static Prevention Measures" on page
6. Remove the top cover. See
94.
95.
"Remove the Server Cover" on page
Prepare the Server for Cold Service
"(Optional) Remove
74.
107.
Preparing to Service the Server 93