Back Panel Connector Locations; Configuring Serial Port Sharing - Oracle Sun Server X4-4 Service Manual

Attach Devices to the Server

Back Panel Connector Locations

The following illustration shows and describes the locations of the back panel connectors. Use
this information to set up the server, so you can access diagnostic tools and manage the server
during service.
Call Out
1
2
3
4
5
†
For OS port naming information, see

Configuring Serial Port Sharing

By default, the service processor (SP) console (NET MGT) port sends serial port output from
the server. Using Oracle ILOM, you can specify that the host console (COM1) be assigned as
owner of the server serial port output. This feature is useful for Windows kernel debugging, as
it enables you to view non-ASCII character traffic from the host console.
You can assign serial port output using either the Oracle ILOM web interface or the command-
line interface (CLI). For instructions, see the following sections:
58 Sun Server X4-4 Service Manual • October 2015
Description
10 Gigabit Ethernet ports NET-0, 1, 2, 3
USB 2.0 ports
DB-15 video connector
Serial management (SER MGT)/RJ-45 serial port
1 Gigabit Ethernet Service processor (SP) network management (NET MGT) port
"Ethernet Port Boot Order and Device Naming" on page
†
60.