Oracle Sun Server X4-4 Service Manual page 149

Caution -
removing or installing expansion cards. You must disconnect the power cables before
performing this procedure.
To view a video of replacing a PCIe card, see
Tip -
videos/E56831/pcie-replace.html.
For serviceability considerations, see
Before You Begin ■
For PCIe slot designation information, see
■
Prepare for service. See
1.
Locate the PCIe card that you want to remove.
2.
See "Server Back Panel Features" on page 20
locations.
3. If necessary, make a note of where the PCIe cards are installed.
4. Unplug all data cables from the PCIe card.
Make note of the cables, so you can install them in the same connectors on the replacement
card.
Component damage. Ensure that all power is removed from the server before
"Prepare the Server for Cold Service" on page
http://docs.oracle.com/cd/E38212_01/
"Component Serviceability" on page
"Component Designations" on page
for information about PCIe slots and their
Servicing CRU Components
Remove a PCIe Card
66.
69.
90.
149