Use this procedure to immediately power off the server to standby power mode.
Caution -
close all applications before powering off.
This procedure is performed locally and requires physical access to the server front panel.
Physical access to the server front panel is required.
Before You Begin
■
"Power Modes, Shutdowns, and Resets" on page 103
■
1.
Press and hold the Power button for at least five seconds until full power is off
and the server enters standby power mode.
2.
Verify that the full power is off, and that the system OK indicator on the front
panel blinks, indicating that the server is in standby power mode.
"Performing Electrostatic Discharge and Static Prevention Measures" on page 74
Next Steps
■
Front Panel Power Off Options
To power off the server gracefully, press the power button for one second (or release when
■
you feel the button click).
To power off the server immediately, press and hold the power button for five seconds.
■
"Power Modes, Shutdowns, and Resets" on page 103
■
Data loss. All applications and files close abruptly without saving. Warn users and
Power Off, Immediate (Power Button)
Preparing to Service the Server
99