Recovery Error Codes; Pei Beep Codes; Dxe Phase Dxe Status Codes - Oracle Sun Server X4-4 Service Manual

Recovery Error Codes

Codes Description
0xF8 Recovery PPI is not available.
0xF9 Recovery capsule is not found.
0xFA Invalid recovery capsule.
0xFB – 0xFF Reserved for future AMI error codes.

PEI Beep Codes

Number of Description
Beeps
1 Memory not Installed.
1 Memory was installed twice (InstallPeiMemory routine in PEI Core called twice).
2 Recovery started.
3 DXEIPL was not found.
3 DXE core firmware volume was not found.
4 Recovery failed.
4 S3 resume failed.
7 Reset PPI is not available.

DXE Phase DXE Status Codes

Codes Description
0x60 DXE core is started.
0x61 NVRAM initialization.
0x62 Installation of the South Bridge runtime services.
0x63 CPU DXE initialization is started.
0x64 CPU DXE initialization (CPU module specific).
0x65 CPU DXE initialization (CPU module specific).
0x66 CPU DXE initialization (CPU module specific).
0x67 CPU DXE initialization (CPU module specific).
0x68 PCI host bridge initialization.
0x69 North Bridge DXE initialization is started.
0x6A North Bridge DXE SMM initialization is started.
0x6B North Bridge DXE initialization (North Bridge module specific).
AMI Checkpoint Ranges
POST and Checkpoint Codes 275