Install A Pcie Card Filler Panel - Oracle Sun Server X4-4 Service Manual

7. If the PCIe card being installed is replacing a faulty PCIe card, manually
clear the PCIe card fault using Oracle ILOM (see
Messages" on page
8. Refer to the documentation shipped with the PCIe card for information about
configuring the PCIe card, including installing required operating systems.
To create or recover RAID configurations, refer to the LSI MegaRAID SAS Software User's
Guide, which is available at the following location:
"Replace the Motherboard (FRU)" on page 219
■
See Also

Install a PCIe Card Filler Panel

When servicing the components in this section, unplug the AC power cords and use ESD
protection.
Component damage. Ensure that all power is removed from the server before
Caution -
removing or installing PCIe card filler panels. You must disconnect the power cables before
performing this procedure.
1. Prepare the server for service. See
Service" on page
85).
"Prepare the Server for Cold
90.
Install a PCIe Card Filler Panel
"Clear Hardware Fault
http://www.lsi.com/support/sun
Servicing CRU Components 155