Oracle Sun Server X4-4 Service Manual page 112

Install a Storage Drive (CRU)
For serviceability considerations, see
■
Before You Begin
For storage drive designation information, see
■
Designations" on page
1. Prepare the server:
For hot service, see
■
For cold service, see
■
2. Verify that the release lever on the storage drive is fully opened.
3. Slide the drive into the drive slot until it is fully seated.
4. Close the latch to lock the drive in place.
5. Do one of the following:
■ If you have performed a cold-service procedure, power on the server using
one of the options described in
configure the storage drive accordingly. Refer to the server OS-specific
instructions.
If you have a hot-service procedure, configure the storage drive accordingly.
■
Refer to the server OS-specific instructions.
"Storage Drive Reference" on page 113
■
See Also
112 Sun Server X4-4 Service Manual • October 2015
"Component Serviceability" on page
"DVD, Storage Drive, and USB
73.
"Prepare the Server for Hot Service" on page
"Prepare the Server for Cold Service" on page
"Powering Off the server" on page 97
66.
89.
90.
and