Power Off, Immediate (Power Button) - Oracle Sun Server X4-4 Service Manual

Power Off, Immediate (Power Button)

the OS. Non-ACPI enabled operating systems might ignore this event and not shut down the
host. If your OS ignores this event, shut down the server using the server OS or Oracle ILOM
(remotely or locally).
Use this procedure to perform a graceful power off of the server to standby power mode.
"Power Modes, Shutdowns, and Resets" on page 103
Before You Begin
To power off the server gracefully, press and immediately release the front panel
1.
Power button.
Caution -
five seconds. Doing so initiates an immediate server shutdown. Press in and release the button
immediately.
2. Verify that the server is in standby power mode.
The system OK indicator on the front panel blinks, indicating that the server is in standby
power mode.
"Performing Electrostatic Discharge and Static Prevention Measures" on page 74
■
Next Steps

Power Off, Immediate (Power Button)

An immediate shutdown should be used in emergency situations or when you know that the loss
of data is nonexistent or acceptable.
98 Sun Server X4-4 Service Manual • October 2015
Potential for loss of data. Do not press in and hold the power button for longer than