Install A Storage Drive (Cru) - Oracle Sun Server X4-4 Service Manual

The blue Ready to Remove indicator and the amber Service Action Required indicator on the
drive might be lit.
See "Storage Drive Reference" on page
4. If necessary, press the Locate indicator button to deactivate the indicator.
5. On the drive you plan to remove, push the storage drive release button to open
the latch.
Grasp the latch and pull the drive out of the drive slot.
6.
7. Populate the empty slot with either a storage drive or a storage drive filler.
If you performed a cold-service procedure, power on the server.
8.
"Install a Storage Drive (CRU)" on page 111
Next Steps ■
"Install a Storage Drive Filler Panel (CRU)" on page 113
■

Install a Storage Drive (CRU)

Installing a storage drive into a server is a two-step process. You must first install the storage
drive into the drive slot, and then configure that drive to the server.
If you removed an existing storage drive from a slot in the server, you must install the
Note -
replacement drive in the same slot as the drive that was removed. Storage drives are physically
addressed according to the slot in which they are installed.
113.

Install a Storage Drive (CRU)

Servicing CRU Components 111