Installation - Siemens SIMOTRAS 6SG7050 Operating Instructions Manual

01.04
5

Installation

CAUTION
Failure to lift the converter in the correct manner can result in bodily injury and/or property
damage.
The converter must be lifted using suitable equipment and under the instruction of appropriately
qualified personnel.
To preclude the risk of deformation damage to the housings of D400 / 680 – 900 Mre
converters, the lifting lugs used to raise them must not be subjected to any horizontal forces.
The user is responsible for installing the converter, motor, transformer as well as other
equipment according to safety regulations (e.g. DIN, VDE), as well as all other relevant national
or local regulations regarding cable dimensioning and protection, grounding, isolating switch,
overcurrent protection, etc.
The converter must be installed in accordance with the relevant safety regulations (e.g. DIN,
VDE), as well as all other relevant national and local regulations. It must be ensured that the
grounding, cable dimensioning and appropriate short-circuit protection have been implemented
to guarantee operational safety and reliability.
Possible lifting method for D400 / 900 Mre converters
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
Installation
5-1