Siemens SIMOTRAS 6SG7050 Operating Instructions Manual page 491

01.04
PNU Description
U749 SLB Read address
(2749) Definition of node addresses and channels from which the SLB must read
data (a total of 8 channels can be read according to the index entries). The
*
digits before the decimal point in the input value define the node address
and those after the point the channel number (see also Section 7 "Starting
up SIMOLINK boards" and Section 8 Sheet Z122).
Example:
2.0 = address 2 channel 0
n750 SLB Receive data
(2750) Visualization parameter for data received via the SIMOLINK board (see
also Section 7 "Starting up SIMOLINK boards" and Section 8 Sheet Z122)
(Z122)
i001: Word 1 PZD section of telegram
...
i016: Word 16 in PZD section of telegram
U751 SLB Transmit data selection
(2751) Selection of connectors whose contents must be transferred as transmit
data by the SLB (see also Section 7 "Starting up SIMOLINK boards" and
*
Section 8 Sheet Z122).
0 = connector K0000
(Z122)
1 = connector K0001
etc.
This parameter not only defines the transmit data, but also their position in
the transmit telegram.
i001: Channel0, low word
i002: Channel0, high word
...
i015: Channel7, low word
i016: Channel7, high word
n752 SLB Display of transmit data
(2752) Process data transmitted by SLB via SIMOLINK in hexadecimal notation
(see also Section 7 "Starting up SIMOLINK boards" and Section 8 Sheet
(Z122) Z122)
U753 SLB Fault delay
(2753) Delay in activation of fault message F015 (see also U741)
* 0 = fault message is activated immediately the telegram failure monitor
(Z121) responds
11.80 Configuring the EB1 expansion boards
U755 Signal type of analog inputs on EB1
(2755) 0 = voltage input 0 to ± 10 V
1 = current input 0 to ± 20 mA
*
(Z112)
i001: AI1 of the first EB2
(Z115)
i002: AI1 of the second EB2
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
Value range No. indices
[Unit]
0.0 to 200.7 Ind: 8
0.1 FS=0.0
Type: O2
Ind: 16
Type: L2
All connector Ind: 16
numbers FS=0
Type: L2
Ind: 16
Type: L2
0.0 to 100.0 Ind: None
[s] FS=0.0
0.1 Type: O2
0 to 1 Ind: 2
1 FS=0
Type: O2
Parameter list
See
Change
P052 = 3
P051 = 40
Offline
P052 = 3
P052 = 3
P051 = 40
Offline
P052 = 3
P052 = 3
P051 = 40
Offline
P052 = 3
P051 = 40
Online
11-143