Siemens SIMOTRAS 6SG7050 Operating Instructions Manual page 384

Parameter list
PNU Description
P468 Setpoint for "Raise motorized potentiometer"
FDS
Motorized potentiometer manual operation: Setpoint for "Raise motorized
(G126)
potentiometer"
P469 Setpoint for "Lower motorized potentiometer"
FDS
Motorized potentiometer manual operation: Setpoint for "Lower motorized
(G126)
potentiometer"
P470 Source for clockwise/counter-clockwise switchover
*
Selection of binector to control "Clockwise/counter-clockwise
BDS
switchover" ("0" state = clockwise).
0 = binector B0000
(G126)
1 = binector B0001
etc.
P471 Source for manual/automatic switchover
*
Selection of binector to control "Manual/automatic switchover"
BDS
("0" state = manual).
(G126) 0 = binector B0000
1 = binector B0001
etc.
P472 Source for set motorized potentiometer
*
Selection of binector to control "Set motorized potentiometer"
BDS
("0" to "1" transition = set motorized potentiometer).
0 = binector B0000
(G126)
1 = binector B0001
etc.
P473 Storage of output value
*
0 No storage of output value:
FDS
The output is set to 0 in all operating states of >o5.
The starting point after ON is determined by P467 (MOP
(G126)
starting value).
1 Non-volatile storage of output value:
The output value remains stored in all operating states and after
voltage disconnection or failure. The last value stored is output
again after voltage recovery/reconnection.
11.23 Oscillation
Function:
Parameters P480 to P483 define the waveshape of a rectangular signal (oscillation setpoint K0203). The value set in P480 determines
the signal level for the time period set in P481 and the value set in P482 the signal level for the time period set in P483.
Oscillation: Selected in P485. The free-running rectangular signal is switched through to the output K0208.
P480 Oscillation setpoint 1
FDS
(G128)
P481 Oscillation time 1
FDS
(G128)
P482 Oscillation setpoint 2
FDS
(G128)
P483 Oscillation time 2
FDS
(G128)
P484 Source for standard setpoint
*
Selection of connector to be injected as the output value when the
FDS
"Oscillation" function is not selected
(G128)
0 = connector K0000
1 = connector K0001
etc.
11-36
Value range No. indices
[Unit]
-199.99 to 199.99 Ind: 4
[%] FS=100.00
0.01% Type: I2
-199.99 to 199.99 Ind: 4
[%] FS=-100.00
0.01% Type: I2
All binector numbers Ind: 2
1 FS=0
Type: L2
All binector numbers Ind: 2
1 FS=0
Type: L2
All binector numbers Ind: 2
1 FS=0
Type: L2
0 to 1 Ind: 4
1 FS=0
Type: O2
-199.9 to 199.9 Ind: 4
[%] FS=5.0
0.1% of maximum Type: I2
speed
0.1 to 300.0 Ind: 4
[s] FS=2.0
0.1s Type: O2
-199.9 to 199.9 Ind: 4
[%] FS=-0.0
0.1% of maximum Type: I2
speed
0.1 to 300.0 Ind: 4
[s] FS=2.0
0.1s Type: O2
All connector Ind: 4
numbers FS=209
1 Type: L2
SIEMENS AG
SIMOTRAS HD Operating Instructions
01.04
See
Change
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Offline
P052 = 3
P051 = 40
Offline
P052 = 3
P051 = 40
Offline
P052 = 3
P051 = 40
Offline
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Online
P052 = 3
P051 = 40
Offline
6SG7000-0BA76