Siemens SIMOTRAS 6SG7050 Operating Instructions Manual page 359

01.04
PNU Description
P055 Copy function data set
*
This parameter allows parameter set 1, 2, 3 or 4 to be copied to parameter
set 1, 2, 3 or 4. This function is applicable only to parameters with 4 indices
(G175)
in the function data set (see also Section 9.1, Data sets and Section 9.8,
and Section 8, Sheet 175).
0xy Do nothing, automatic resetting value at the end of a copy
operation.
1xy The contents of parameter set x (source data set, x=1, 2, 3 or 4)
are copied to parameter set y (target data set, y=1, 2, 3 or 4)
(parameter set x remains unchanged, the original contents of
parameter set y are overwritten).
x and y are the respective parameter set numbers (1, 2, 3 or 4)
of the source and target parameter sets.
The copy operation is started by switching P055 over into parameter mode
when P055=1xy.
During the copy operation, the numbers of the parameters being copied are
displayed on the operator panel (PMU).
At the end of the copy operation, P055 is reset to P055=0xy.
r056 Display of active function data set
(G175)
P057 Copy Bico data set
*
This parameter allows parameter set 1 or 2 to be copied to parameter set 1
or 2. This function is applicable only to parameters with 2 indices in the
(G175)
Bico data set (see also Section 9.1, Data sets and Section 9.8, and Section
8, Sheet 175).
0xy Do nothing, automatic resetting value at the end of a copy
operation.
1xy The contents of parameter set x (source data set, x=1 or 2) are
copied to parameter set y (target data set, y=1 or 2) (parameter
set x remains unchanged, the original contents of parameter set
y are overwritten).
x and y are the respective parameter set numbers (1 or 2) of the
source and target parameter sets.
The copy operation is started by switching P057 over into parameter mode
when P057=1xy.
During the copy operation, the numbers of the parameters being copied are
displayed on the operator panel (PMU).
At the end of the copy operation, P057 is reset to P057=0xy.
r058 Display of active Bico data set
(G175)
r059 Display of operating state
Meaning as for r000
11.4 Definition of SIMOTRAS converter
r060 Software version
Converter software release
(G101)
i001: CUD
i002: Slot D (board location 2)
i003: Slot E (board location 2)
i004: Slot F (board location 3)
i005: Slot G (board location 3)
r061 Creation date of software
i001: Year
(G101)
i002: Month
i003: Day
i004: Hour
i005: Minute
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
Value range No. indices
[Unit]
012 to 143 Ind: None
1 FS=012
Type: L2
1 to 4 Ind: None
1 Type: O2
012 to 121 Ind: None
1 FS=012
Type: L2
1 to 2 Ind: None
1 Type: O2
0.0 to 14.5 Ind: None
0.1 Type: O2
0.0 to 9.9 Ind: 5
0.1 Type: O2
Ind: 5
Type: O2
Parameter list
See
Change
P052 = 3
P051 = 40
Offline
P052 = 3
P052 = 3
P051 = 40
Offline
P052 = 3
P052 = 3
P052 = 3
P052 = 3
11-11