Installation And Disassembly; Safety Notices For Installation - Siemens SIMATIC NET SCALANCE XCM-100 Operating Instructions Manual

Installation and disassembly

6.1

Safety notices for installation

Safety notices
When installing the device, keep to the safety notices listed below.
If a device is operated in an ambient temperature of more than 55 °C, the temperature of the
device enclosure may be higher than 70 °C. The device must therefore be installed so that it is
only accessible to service personnel or users that are aware of the reason for restricted access
and of the required safety measures at an ambient temperature higher than 55 to 70 °C.
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the
ambient temperature of the device.
NOTICE
Improper mounting
Improper mounting may damage the device or impair its operation.
• Before mounting the device, always ensure that there is no visible damage to the device.
• Mount the device using suitable tools. Observe the information in the respective section
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
The device is intended for indoor use only.
SCALANCE XCM-100 Media Converter
Operating Instructions, 07/2022, C79000-G8976-C659-01
WARNING
WARNING
about mounting.
WARNING
WARNING
6
25