Properties; Digital Electronic Module 8Do Dc24V/0.5 A (6Es7132-4Bf00-0Aa0) - Siemens SIMATIC ET 200S Manual

Properties

1.1 Digital electronic module 8DO DC24V/0.5 A
(6ES7132-4BF00-0AA0)
Properties
● Digital electronic module with eight outputs
● Output current 0.5 A per output, total current 4 A
● Rated load voltage 24 V DC
● Short-circuit protection
● Suitable for solenoid valves, DC contactors, and indicator lights
● Supports isochronous operation
Special features
When the rated load voltage 24 V DC is applied to the power module via a mechanical
contact, the digital outputs carry a "1" signal for about 50 μs for switching reasons. You have
to take this into consideration if you use this module in connection with high-speed counters.
Requirements for operation
It is possible to operate the 8DO DC24V 0.5A digital electronic module using the following
interface modules with the order numbers specified (or higher). The interface modules listed
in the table are not subject to any constraints.
Interface module
IM 151-1 STANDARD
IM 151-1 FO STANDARD
IM 151-1 HIGH FEATURE
IM 151-3 PN
IM 151-3 PN HIGH FEATURE
IM 151-3 PN FO
6
Order number (or higher)
6ES7151-1AA03-0AB0
6ES7151-1AB02-0AB0
6ES7151-1BA01-0AB0
6ES7151-3AA20-0AB0
6ES7151-3BA20-0AB0
6ES7151-3BB21-0AB0

Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)

1
Firmware version (or
higher)
---
---
V2.1.3
V4.0.1
Manual, 10/2015, A5E01077385-AB