Documentation - Siemens SINUMERIK 840Di System Overview

7 Information and Training
7.1

Documentation

The user can only use a high-performance programmable controller or drive
system optimally if he has learned the performance of the individual components in
intensive training courses and by reading a good documentation created by
experts.
For the SINUMERIK/SIMODRIVE products, a comprehensive documentation is
available both on paper and electronically.
The documentation is divided into 3 levels:
•
General documentation
Advertising materials/catalogs
-
•
User documentation
Operation: Short Guide, Operator's Guide
-
Programming: Short Guide, Programming Guide, Fundamentals, and
-
Programming Guide, Production Planning
•
Manufacturer/Service Documentation
Hardware Descriptions, Descriptions of Functions and Service Descriptions
-
Documentation on paper
A complete overview of the entire documentation for SINUMERIK/SIMODRIVE
products in the languages available is contained in:
Catalog NC 60·2000/2001, Chapter 11: Documentation
The central document for the SINUMERIK 840Di, the SINUMERIK 840Di Manual,
contains an overview of documents relevant especially for this automation system
in the Appendix.
Electronic documentation
In the electronic form, the SINUMERIK/SIMODRIVE documentation is available on:
•
CD ROM
•
Internet: available soon
CD ROM
All SINUMERIK/SIMODRIVE publications are available on CD ROM in PDF format
in the languages German and English under the product designation "DOConCD".
-52
7
© Siemens AG 2001 All Rights Reserved
SINUMERIK 840Di System Overview (SYI) - 02.2001 Edition
02.2001