Scan-To-Ftp/Smb Defaults; Original Size Defaults - Xerox WorkCentre 7132 User Manual

10 Setups

Scan-to-FTP/SMB Defaults

This feature allows you to configure or change the default settings for scanning and
sending documents to specified destinations through the FTP or SMB protocol.
1.
Select [Scan-to-FTP/SMB
Defaults] on the [Scan Mode
Settings] screen.
2.
Change the required settings.
3.
Select [Close].
Transfer Protocol
Specifies the default transfer protocol.

Original Size Defaults

This feature allows you to configure or change the scan size buttons on the [Original
Size] feature on the [Layout Adjustment] screen.
1.
Select [Original Size Defaults]
on the [Scan Mode Settings]
screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Scan Size 1 to 11
A/B Series Size
Specifies standard document sizes in A/B series size. Use the scroll buttons to switch
between screens.
Inch Size
Specifies standard document sizes in inches. Use the scroll buttons to switch between
screens.
Others
Specifies other miscellaneous sizes. Use the scroll buttons to switch between screens.
Variable Size
Specifies a user-defined size set using the scroll buttons.
268 Xerox WorkCentre 7132 User Guide