Fax Setup; Scan Defaults; System Setup; Network Settings - Xerox WorkCentre 3550 User Manual

Machine Status

Fax Setup

Your machine provides you with various user-selectable options for setting up the fax system. You can
change the default settings for your preferences and needs. Receiving and Sending settings can be
customized. A passcode is required to access and change the default settings.

Scan Defaults

The scan options, including File Format, Output Color and Resolution, can be set to those most
frequently used for the Scan to USB, Scan to FTP and Scan to SMB options. A passcode is required to
access and change the default settings. When you scan a document, the default settings are used
unless they have been changed for the current job.

System Setup

System Setup options enable you to customize settings which are specific to the machine, such as Date
& Time and Power Save. A passcode is required to access and change the System Setup settings.

Network Settings

You may set up the network using the machine's display screen. Before doing that, you must have the
relevant information concerning the type of network protocols and computer system you use. If you
are not sure which setting to use, contact your System Administrator to configure this machine on the
network. A passcode is required to access and change the Network Settings.
22 Xerox WorkCentre 3550
User Guide