Table of Contents
Advertisement
8.3 VTL Wizard
If you do not see the world wide name (WWN) of the host, make sure the host is
connected to a Fibre Channel port on the ETERNUS CS800 and click Discover
Remote Hosts again.
The Backpanel Locations section displays a graphical representation of the Fibre
Channel and Ethernet ports as they appear on the rear of the system.
2. Enter information about the host:
Remote Host WWPN
Alias
3. Click Apply.
4. (Optional) To discover additional hosts, repeat Steps 1–3.
5. Click Next to continue.
Figure 108: VTL Wizard: Discover Remote Hosts
Step 5: Map Remote Hosts
1. Enter information about the host access group (see
on page
Group Name
Partition
Remote Host
160
An Active status indicates the host is currently logged on to one or more Fibre
Channel target ports.
161):
Enter a name for the group.
Select the partition to associate with the group.
Select the host (initiator) to associate with the group.
Enter the World Wide Port Name (WWPN) of the host.
Enter a descriptive alias for the host
"VTL Wizard: Map Remote Hosts"
ETERNUS CS800
Advertisement
Table of Contents
