Table of Contents
Advertisement
12.5 VTL Status
Logical View
Use the Logical View page to view information about the virtual (logical) components in a
VTL partition. You can also view information about used space in the partition.
To access the Logical View page, on the VTL Status page, click the Logical View tab (see
"Logical View Page" on page
Figure 270: Logical View Page
The Partitions section displays the following information about VTL partitions:
Partition
Number of Drives
Capacity
Used
Used Percent
426
426).
The name of the partition.
The number of virtual tape drives in the partition.
The storage capacity of the partition.
The amount of space on all cartridges in the partition currently
used to store data. The value for Used might be less than the
original, native (raw) data size because the data is compressed
before it is written to the media.
The amount of currently used space on all cartridges in the
partition expressed as a percentage of the total capacity
( [ Used / Capacity ] x 100 ).
ETERNUS CS800
Advertisement
Table of Contents
