Table of Contents
Advertisement
10.3 VTL Configuration
To allow multiple hosts to access devices that belong to the same partition, you must create
separate host access groups for each host.
To access the Remote Host Mapping page, on the Remote Host Access page, click the
Remote Host Mapping tab (see
Figure 153: Remote Host Mapping Page
Tasks
Use the Remote Host Mapping page to perform the following tasks:
View information about existing host access groups (see
l
Groups" on page
Add a new host access group to a partition (see
l
on page
Edit properties for an existing host access group (see
l
Group" on page
Delete a host access group from a partition (see
l
Group" on page
Remote Host Mapping And Groups
The Remote Host Mapping & Groups section displays the following information for all host
access groups on the ETERNUS CS800:
Group Name
Remote Host
Target Port
234
"Remote Host Mapping Page" on page
234).
235).
236).
237).
The name of the group.
The host (initiator) associated with the group.
The Fibre Channel port (target) associated with the group.
234).
"Remote Host Mapping And
"Adding a Remote Host Access Group"
"Editing a Remote Host Access
"Deleting a Remote Host Access
ETERNUS CS800
Advertisement
Table of Contents
