Table of Contents
Advertisement
10.8 Notifications
1. From the AISConnect page, click the Control tab.
2. Do one of the following actions:
l
l
Remote Access Policies
Use the Remote Access Policies page to view the current remote access policies status, or
to enable or disable remote access policies (see
318).
Figure 204: AIS Remote Access Policies
Remote access policies must be enabled for a Fujitsu support specialist to remotely connect
to the system using SSH or HTTP. If remote access policies are disabled, remote
connection using SSH or HTTP is not possible.
To enable or disable remote access policies:
1. From the AISConnect page, click the Remote Access Policies tab. The Remote
Access Policies page displays the current remote access policies status.
2. Do one of the following actions:
l
l
Smart Poll
Use the Smart Poll page to immediately establish a connection to the AIS server at the
Fujitsu Service Centre. This allows a support specialist to remotely access the ETERNUS
CS800 to diagnose a problem.
318
Click Start to start the AISConnect service.
Click Stop to stop the AISConnect service.
Click Enable to enable remote access policies.
Click Disable to disable remote access policies.
"AIS Remote Access Policies" on page
ETERNUS CS800
Advertisement
Table of Contents
