Table of Contents
Advertisement
8.4 OST Wizard
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see
Confirm" on page
changes.
2. To make changes to a VTL partition, media, or host access group you added, first select
the item and click Delete to delete it. Then click Previous to return to the appropriate
step and add a new item.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
Figure 110: VTL Wizard: Confirm
8.4
OST Wizard
The OST wizard provides guided assistance for configuring the ETERNUS CS800 to present
its storage as one or more OST (OpenStorage) storage servers for use with a backup
application. The wizard guides you through the process of adding one or more OST storage
servers, configuring LSUs (logical storage units), and adding OST users. The wizard also
provides a link for downloading and installing the OST Plug-in on your backup host.
Additional Information
The OST Wizard is available in ETERNUS CS800 and Multi-Protocol configurations
l
only.
If you plan to use Concurrent Optimized Duplication, you should complete the
l
Replication wizard before beginning the OST wizard (see
169).
162
162). If necessary, click Previous to return to a previous step to make
"VTL Wizard:
"Replication Wizard" on page
ETERNUS CS800
Advertisement
Table of Contents
