Table of Contents
Advertisement
8.2 NAS Wizard
Figure 103: NAS Wizard: Add Share
Step 6: Confirm
1. Review the settings you selected to make sure they are correct (see
Confirm" on page
changes.
2. To make changes to a NAS share you added, first select the share and click Delete to
delete the share. Then click Previous to return to the previous step and add a new share.
3. After you have confirmed all settings, click Finish. The wizard configures the
ETERNUS CS800 with the settings you selected.
154
155). If necessary, click Previous to return to a previous step to make
"NAS Wizard:
ETERNUS CS800
Advertisement
Table of Contents
