Table of Contents
Advertisement
Figure 122: Email Alerts Wizard: About
Step 2: Server
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing
e-mail server (see
2. In the From Email Address box, enter the return e-mail address displayed in e-mails
sent by the ETERNUS CS800.
3. Specify a return address that lets you easily identify the system that generated the e-
mail (for example,
@ symbol and a valid domain name, including a period.
4. (Optional) Select the Enable Admin Alerts about Email Server not configured
check box to have system generate administration alerts to notify you if an e-mail server
is not configured.
5. (Recommended) Select the Enable automatic emails to Fujitsu Technology
Solutionscheck box to periodically send system configuration and status information to
Fujitsu Technology Solutions, including any software upgrades you have installed using
the Software Upgrade Utility. Fujitsu Technology Solutions Support can use this
ETERNUS CS800
"Email Alerts Wizard: Server" on page
When entering IP addresses, never use an address that is in a reserved IP
address range.
To see a list of reserved IP address ranges, click the quick tip icon [?]located
near the IP address field.
To use hostname format, you must specify at least one DNS IP address on
the Network page (see
systemname@any-domain.com
"Network" on page
319).
). The return address must contain an
8 Configuration Wizards
178).
177
Advertisement
Table of Contents
