Table of Contents
Advertisement
11.2 Replication Send
Queued
Success
Recovering The recover operation is in process.
Replicating The replication operation is in process.
Failed
Enabling Replication For a Share or Partition
Enable replication for a NAS share or VTL partition to allow the data on the share or partition
to be replicated to other ETERNUS CS800 systems (the targets). Disable replication if you
do not want to replicate the share or partition to other ETERNUS CS800 systems.
To be eligible for replication, a share or partition must have data deduplication
enabled at the time it is created.
To enable or disable replication for a share or partition:
1. Select the share or partition and click Configure.
The Share or Partition Configure window displays (see
Window" on page
Figure 236: Share or Partition Configure Window
2. Select the Enable Replication check box to enable replication for the share or partition.
3. Or clear the Enable Replication check box to disable replication for the share or
partition. Any jobs from that share or partition that are in progress or queued will transition
to failure. Also, all replication job history for that combination of target and share or
partition will be removed.
4. Select the check box for each replication target you want to replicate the share or
partition to. (You must select at least one target.) When the share or partition is
374
The synchronization job is queued and will continue when the system is ready.
The synchronization job was completed successfully.
The synchronization job was not completed.
374).
"Share or Partition Configure
ETERNUS CS800
Advertisement
Table of Contents
