Fujitsu ETERNUS CS800 User Manual page 163

You cannot use the OST wizard to edit existing storage servers or LSUs. For more
l
information about working with OST, see
To begin the OST wizard, on the Wizards menu, click OST.
Step 1: About
1. Read the information about the wizard (see
The About page displays the status of the OST service. OST settings can be configured
in Ready, Stopped, or Verifying state. The OST server is available for backup only in
Ready state.
2. Click Next to continue.
At any time while using the wizard, you can click Previous to return to the previous
step.
At any time while using the wizard, you can click Previous to return to the previous step.
Figure 111: OST Wizard: About
Step 2: Add Storage Servers
1. Under Add Storage Server, enter information about the storage server (see
Wizard: Add Storage Servers" on page
Name
ETERNUS CS800
"OST Configuration" on page
"OST Wizard: About" on page
165):
Enter the name of the storage server.
CAUTION!
Do not use an underscore ( _ ) in the name of
the storage server.
8 Configuration Wizards
241.
163).
"OST
163