Table of Contents
Advertisement
10.7 Scheduler
cause discrepancies between the specified maximum bandwidth and observed traffic.
If the ETERNUS CS800 is configured to use a bonded network interface for replication
l
traffic, load balancing is determined independently by the bonding mode selected for the
interface (see
for all slave devices in the bonded interface to calculate the overall outgoing traffic rate.
The replication throttle bandwidth maximum is specified in KB/s or MB/s, so depending
l
on the statistic or report you are observing, you may need to convert the bandwidth
maximum to Kb/s or Mb/s in order to correctly compare it to the observed values.
Scheduling E-mail Reports
The ETERNUS CS800 can automatically generate a report with system status data or with
configuration data and send it to all configured e-mail recipients.
To enable the ETERNUS CS800 to send e-mail, you must specify an outgoing e-
mail server (see
recipients (see
To configure a schedule for e-mail reports:
1. On the Scheduler page, add or edit an event in the Email Reports row (see
Editing a Scheduled Event" on page
2. In the Report Type drop-down box, select the type of e-mail report to schedule (Status
or Configuration).
3. (Optional) Specify when and how often the event reoccurs (see
Scheduled Event" on page
4. Click Apply.
Scheduling Healthchecks
During healthchecks, the ETERNUS CS800 performs tests to verify the health and integrity
of the data deduplication blockpool. Schedule healthchecks regularly to make sure the
system is healthy and operating correctly. When you schedule healthchecks, only the
healthchecks that are currently enabled are run.
For more information about enabling healthchecks,
443.
To configure a schedule for healthchecks:
1. On the Scheduler page, add or edit an event in the Healthchecks row (see
on page
292
"Network" on page
"Server" on page
"Email Reports" on page
293).
286).
319). Because of this, you may need to sum the values
300). In addition, you must specify one or more
303).
288).
see"Healthchecks" on page
"Adding or
"Setting Recurrence for a
"Scheduler"
ETERNUS CS800
Advertisement
Table of Contents
