Table of Contents
Advertisement
1
Introduction
1.1
Preface
This manual introduces the FUJITSU Storage ETERNUS CS800 enhanced data protection
system and provides information about:
Features and hardware
l
Installation
l
System operations
l
Configuration
l
Web interface
l
Basic troubleshooting
l
Basic spare parts replacement procedures
l
This manual applies to the ETERNUS CS800 V3.2 software which supports the
ETERNUS CS800 S6 hardware. For hardware related topics for an ETERNUS CS800
S2/S3/S4/S5 system, please continue to use the appropriate manual.
Audience
This manual is written for ETERNUS CS800 system operators and system administrators.
It is useful for the audience to have a basic understanding of Linux.
Document organization
Following is a brief description of chapter contents.
Chapter
l
safety when working on your ETERNUS CS800.
Chapter
l
CS800 system.
Chapter
l
ETERNUS CS800 system and instructions for turning on/off the system.
Chapters
l
Modules" on page 81
page 107
and the initial software configuration.
Chapter
l
ETERNUS CS800
"Important Information" on page 16
"System Description" on page 27
"Hardware Description" on page 43
"Rack Requirements" on page 79
and chapter
describe all steps to install the hardware for the ETERNUS CS800 S6 system
"Remote Management" on page 133
provides essential information regarding
provides an overview of the ETERNUS
describes the hardware components of the
,
"Installing the ETERNUS CS800 S6
"Initial Configuration, Connecting with the Network" on
describes how to use the management
11
Advertisement
Table of Contents
