Fujitsu ETERNUS CS800 User Manual page 351

SSL
The SSL page allows you to enable or disable SSL on the ETERNUS CS800. You can also
install a new SSL certificate to replace the Fujitsu Technology Solutions default SSL
certificate.
To access the SSL page, on the Security page, click the SSL tab (see
351).
Figure 226: SSL Page
Tasks
Use the SSL page to perform the following tasks:
Enable or disable SSL on the ETERNUS CS800 (see
l
If you enable SSL, see
important information about Web browser settings.
Install a new SSL certificate (see
l
Enabling SSL
SSL (Secure Sockets Layer) is a protocol that provides security and privacy over the Internet
by negotiating encryption keys before transmitting data between a client and a server.
To establish a secure connection, the ETERNUS CS800 must have an encryption key
assigned to it by a Certification Authority in the form of a certificate file, private key file, and
pass phrase. After you install these components, you can establish a secure connection
using the SSL protocol. The ETERNUS CS800 comes with a Fujitsu Technology Solutions
default SSL certificate.
To enable or disable SSL:
1. Under SSL Properties, select the Enable SSL option to enable SSL.
Or select the Disable SSL option to disable SSL.
ETERNUS CS800
"Server Authentication Warnings" on page 352
"Installing an SSL Certificate" on page
10 Configuration
"SSL Page" on page
"Enabling SSL" on page
for
352).
351).
351