Values that exceed the maximum value of the vertical axis are shown in lighter green.
l
Each bar on the graph represents approximately 1 second of time.
l
Hold the cursor over a bar to display the value of the bar.
l
RAID
The RAID page allows you to view throughput performance for RAID read and write activity.
To access the RAID page, on the Performance page, click the RAID tab (see
on page
Figure 265: RAID Page
Use the RAID page to display recent RAID activity in dynamic graphs:
The top graph reports data reads and the bottom graph reports data writes.
l
The horizontal axis displays time (0–100 seconds).
l
The vertical axis displays the amount of data read or written (100 OPS/s).
l
ETERNUS CS800
417).
12 Status
"RAID Page"
417