Date & Time - Fujitsu ETERNUS CS800 User Manual

6.3 Running the Getting Started Wizard
In this example, you would specify a second set of routing details for the replication interface
on the source ETERNUS CS800:
Destination
Dest Netmask
Dest Gateway
Figure 88: Interface Routing: Example 3
Backpanel Locations
The Backpanel Locations section at the bottom of the Network page displays a graphical
representation of the Ethernet ports as they appear on the rear of the system.
The diagram indicates the current bonding configuration and connectivity status for all
Ethernet ports.
Ports that are bonded together in an interface are shaded the same color.
l
A green border indicates a port is connected to a network.
l
A red border indicates a port is configured but is not connected to a network.
l
Click Update Port View to update the information on the diagram.
l
6.3.4 Date & Time
The Date & Time page allows you to set the system date and time of the ETERNUS CS800.
128
Use the IP address of the gateway (192.168.10.1).
Use 255.255.255.255.
Use the replication IP address of the source ETERNUS CS800
(192.168.10.100).
ETERNUS CS800