Table of Contents
Advertisement
The rack systems from Fujitsu (PRIMECENTER Rack) support the installation of
ETERNUS CS800 S6 components. Installation in most current rack systems from other
manufacturers is also supported.
To ensure proper ventilation, any unused areas in the rack must be sealed using dummy
covers. Ventilation takes place from the front to the back and may not be obstructed! The
power is supplied via the multiple socket outlets fitted in the rack.
PRIMECENTER Rack
The main features of the rack systems from Fujitsu are as follows:
rail systems that can be mounted without tools
l
support systems having a linear alignment feature to ensure that they can be adjusted to
l
different rack depths
Asymmetrical PRIMECENTER Rack provides an enhanced cable management in the lateral
rack area.
Installation of the cable management is described in detail in the Technical Manual for the
respective rack.
3rd Party Racks
Installation in most current rack systems from other manufacturers (3rd party racks) is
also supported. For details please contact your sales representative.
For detailed information about PRIMECENTER rack, see the following manual:
http://manuals.ts.fujitsu.com/index.php?id=5406-5605-5606
80
ETERNUS CS800
Advertisement
Table of Contents
